TRAMCO TRAMROLL™
The TRAMCO TRAMROLL™ Enclosed Belt Conveyor offers a large selection of standard and innovative features that sets it apart from other conveyors.
Standard features include dust and weather tight enclosed housing to protect the material being moved, improve the environmental safety and reduce housekeeping.
The TRAMROLL™ also features hipped roof covers, plus a proven design allowing extra clearances between belt, idlers, pulleys and housing for easy access and maintenance.
With innovative features such as a self reloading and self cleaning tail section, multiple inlets and discharges and horizontal and inclined configurations the TRAMROLL™ is one of the most versatile conveyors in the industry.
The TRAMROLL™ has been put into service around world by some the world's greatest companies.
Below are just a few great companies that trust the
TRAMCO TRAMROLL™.
STANDARD TRAMROLL™ FEATURES
- All conveyor sections are pre-assembled on a level 215ft fixtures, match-marked
and dowel-pinned for field assembly. With proper rigging practices, Intermediate
Sections can be assembled and shipped in multiples of up to 40 ft. lengths, saving
on field time.
- ~3 mils Powder Coat finish. The finish has a good hardness, excellent flexibility, excellent exterior stability, good chemical and solvent resistance, and a very good corrosion protection.
All parts are powder coated before assembly. All fasteners are cadmium plated.
- Drives are pre-assembled with the oil bath chain case fitted and removed for shipment.
- Oil bath chain cases are split with two top inspection doors, one over each sprocket.
- Out-board mounted bearings on the head section.
- All intermediate sections are pinned and robotically welded in fixtures to ensure
squareness and length.
TRAMROLL™ STANDARD HEAD
- Hinged inspection door for easy access
- Head lined with Urethane, for extended life
of housing head spout
- Solid Steel Shafts
- Standard packing gland shaft seal
- Engineered Heavy-Duty external bearing design
for trouble-free and easy access for maintenance
- Standard head with removable cover
- Belt alignment switch with automatic shutoff
TRAMROLL™ INTERMEDIATE CONSTRUCTION
- Dowel pins ensure proper alignment
- Wider Housing
- Standard totally bolted construction with grade 5 cadmium plated bolts
- Standard 12 gauge housing
- 12 gauge hipped roof covers
- Dust and weathertight construction
- Bolted bottom
- Adjustable belt loader box to ensure center loading
- Inspection doors with twist and lock handle
- Located per customer requirements
or every 100'
TRAMROLL™ STANDARD TAIL
- External bearings
- Hinged inspection door for easy access, inspection and maintenance
- Screen guarded inspection ports
- Patented self-cleaning and reloading tail pulley
- Rubber sealed telescoping tail take-up adjustment system
- Pillow block roller bearings
BUILD A TRAMROLL™