|
Are you getting these features?
TRAMCO STANDARD Dustless Loader Features
-
5-Stage wash with durable 2 mil baked on enamel
finish over fully primed parts. All Parts are painted before assembly. All
fasteners are cadmium plated.
-
All sections are pinned and "robotically" welded in
fixtures to ensure squareness and length.
-
Available in a wide range of sizes from 6,000 to 18,000
cu.ft. per hour.
-
Takes the loading of dry products to another level. Starting
in the retracted position above a container or vehicle, the heavy duty three
cable system retracts the spout to the desired position.
-
Air actuated inlet
gate opens to start the product flowing through a series of interlocked buckets
fabricated from either mild or stainless steel.
-
Interlocked buckets, shielded by an outer sleeve constructed
of nylon and or filter media, contain the dust laiden material.
-
Retarding hopper with
a proportional gate valve increases or decreases the amount of flow as required
to decrease the amount of product dusting.
-
As the product
contacts the bottom of the container or vehicle, a tilt switch specifically
placed at the bottom of the retarding hopper, senses the grains angle of repose
from the pile automatically shutting off the air inlet gate and retracting the
spout to a preset height. Once the
desired height is reached and the tilt switch is once again hanging freely, the
air inlet gate opens to again continue the product flow.
This automatic process continues until the vehicle or container is fully
loaded.
-
Dustless Loader turns your loading needs into a safe,
effective, and economic operation.
|