TRAMCO DRACON™

The TRAMCO DRACON™ Conveyor is specifically designed for the handling of soft stock or materials that are easily crumbled or broken, such as seed, feed, pellets and other fragile materials.

All components are jig welded to ensure thier interchangeability and are checked for precise fit by the strict TRAMCO 100% inspection policy. The DRACON™ is built standard with 10-gauge construction. The U-shaped trough is available in widths of 9" - 12" - 14" and 16". Our "total quality process" means that you can count on years of quiet, trouble-free performance from your TRAMCO DRACON™ Conveyor.

The DRACON™ has been put into service around world by some the world's greatest companies.

STANDARD DRACON™ FEATURES

All conveyor sections are pre-assembled on a level 215ft fixtures, match-marked and dowel-pinned for field assembly. With proper rigging practices, Intermediate Sections can be assembled and shipped in multiples of up to 40 ft. lengths, saving on field time.
~3 mils Powder Coat finish. The finish has a good hardness, excellent flexibility, excellent exterior stability, good chemical and solvent resistance, and a very good corrosion protection. All parts are powder coated before assembly. All fasteners are cadmium plated.
Drives are pre-assembled with the oil bath chain case fitted and removed for shipment.
Oil bath chain cases are split with two top inspection doors, one over each sprocket.
All liners use 1/2" welded studs attached to the exterior of the liner plates to eliminate wear points on the inside of the liners.
All internal conveyor sprockets are split and hardened to ~420 BHN. Split sprockets can be "turned around" for double life. "Walking Tooth Sprockets" used where applicable.
Conveyor chains are all cottered constructed for ease of removal. All links are pre-heated prior to robotic welding of the attachment bars.
Conveyor "By-Pass" inlets have a bolted side plate construction to ease removal/replacement of the internal liner plates without removal of the feed spout and or transition.
All intermediate sections are pinned and robotically welded in fixtures to ensure squareness and length.

DRACON™ STANDARD HEAD

Hinged relief doors for conveyor protection
Flanged discharge
U.H.M.W. dust seal
Take-up in the head with self-cleaning tail

Flame-hardened split spocket for easy replacement

DRACON™ INTERMEDIATE SECTIONS

Inspection doors at each inlet or per customers' requirements

Dowel Pins ensure precision alignment

DRACON™ STANDARD TAIL & FEED INLET

Heavy-duty ball bearings
Four bolt flanged bearing

Bypass feed inlet allows feed to flow around return flight directly into the bottom run without damaging material

DRACON™ CHAIN

Heavy-duty heat treated chain supported by our standard center return rail
Optional return sprocket or roller

DRACON™ TROUGH

Contour-shaped U.H.M.W. polyethylene flights are standard on all TRAMCO DRACON™ conveyors for self-cleaning and quiet operation
Steel attachments with bolted construction
Dowel pin line-up holes to ensure precise fit and ease of installation
Extra long-lasting fixed center return rail channel, capped with replaceable U.H.M.W. to eliminate steel-on-steel contact
All steel or combination chain